We now offer micrometer adjustable seating dies for Wildcat Magnum Cartridges. This is being added to our current line of dies and it is intended for Chey Tacs, 50BMG and any other large caliber Wildcat that have nothing commercially available for them.
Contact us to discuss your requirements.
At some point, you have or you will spend the money for a high dollar target rifle. Why feed it ammo from a commercial, off-the-shelf die
that may or may not yield optimum results for concentricity and brass life? WTC Dies are made from samples of your fired brass to full length size only .001 to .0015″ on the body diameter and just enough on the necks to get 30, 40, or even 50 reloads from your brass (neck annealing required).
We are pleased to offer the Magnum die. Where the standard full length sizing die is limited to cartridge size up to 30-06, the magnum die will accept cartridges larger than a 30-06 and up to a .416 Rigby. Additionally, if the base diameter of the cartridges to be sized exceeds .560, it is best suited for the magnum die.
We have now scaled up yet again and are happy to offer the 50 caliber sizing die. Now you can obtain the same exacting standards on your 50 caliber brass as you have on the smaller cartridges. Industry standard 1.5-12 thread allows it to fit in most presses. Like its smaller brethren, it is head space adjustable and is made to fit your brass and chamber combination.